News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

Nissan 200sx Ca18det

Started by Pedersen, April 04, 2010, 10:20:37 AM

Previous topic - Next topic

mattias

Quote from: GintsK on April 06, 2010, 04:40:38 PM
Mattias, IMHO you are too optimistic.  :)
VT still have stability problems. It do not work on dual cores. It hangs time to time on older PCs too. It have problems with communications. E.g. my prolific works OK, but FDTI - not. Instead - MT works with any. For me different hot key configuration cause headaches.

I will try 1.1.70 with VT and write my review shortly. More constructive than this post. I have some list on paper already.

Gints
I may be lucky to have a pretty solid mobile platform then, it's single core Pentium M 1.5 GHz running Windows XP with a Prolific adapter.
Did you know the hotkeys are configurable ? ;)  (Tools -> Gauge group editor)

Anyway, look out towards the weekend when another test release will come - you may want to verify all your problems against that version, but please submit your list for the current 2010-03-08 version as well, ASAP in fact as Emil is in Budapest and pushing things along!

Pedersen

#16
Quote from: [email protected] on April 05, 2010, 08:50:13 PM
Try this:
http://www.vems.co.uk/VEMSInstalls/VemsMT1.1.18Nissan.zip


Nothing happens when I press "download-config"
Overwriting saved config

Quote from: mattias on April 06, 2010, 07:20:00 AM
I would not recommend using MegaTune at all, the test versions of VemsTune are a much better and less frustrating method. All the functionality you are looking for is integrated.

http://www.vems.hu/download/v3gui/

Check the download link regularly, download and use the latest one, remember to use the built-in firmware web tool to  download the firmware you want to work with, the recent  1.1.70 is recommended (or 1.1.18 if you feel like going medieval).

Someone should make a configlet for the Nissan trigger. I would if I had a car to upgrade to 1.1.70.

Mattias think you 1.1.70 could work for me?
And can it work with Nissan 24slot 1 CAS trigger made by Rob
What about the config and tables to ca18det

Best regards
Jens

[email protected]

Take the config.txt and tables.txt from that zip file I linked to - and store them somewhere.
Use VEMSTune to upgrade to 1.1.70 and read through this http://www.vems.hu/wiki/index.php?page=VemsTune/FirmwareUpgradeExample
Rather than copy the config, drag your config on to the main screen and you will be prompted to upload it.

mattias

Jens: Do what Rob says.  ;)

Pedersen

Quote from: [email protected] on April 08, 2010, 01:35:33 AM
Take the config.txt and tables.txt from that zip file I linked to - and store them somewhere.
Use VEMSTune to upgrade to 1.1.70 and read through this http://www.vems.hu/wiki/index.php?page=VemsTune/FirmwareUpgradeExample
Rather than copy the config, drag your config on to the main screen and you will be prompted to upload it.

config.txt and tables.txt is it the same as config.mtt and tables.mtt ?
cause I can´t find the txt files

[email protected]

I just downloaded the zip file and in the config directory I see:

config.mtt
config.txt
configKevDuckworthIdling.txt
tables.mtt
tables.txt
tablesKevDuckworthIdling.txt
wbo2defaults.txt

Pedersen

Quote from: [email protected] on April 08, 2010, 05:31:31 AM
I just downloaded the zip file and in the config directory I see:

config.mtt
config.txt
configKevDuckworthIdling.txt
tables.mtt
tables.txt
tablesKevDuckworthIdling.txt
wbo2defaults.txt


OK! With me is that just called:

wbo2defaults
tablesKevDuckworthIdling
tables
tables.mtt
configKevDuckworthIdling
config
tables.mtt

But thanks again Rob




mattias

That's just Micro$oft Windows f**cking with you. Make sure to disable the explorer feature that hides filename extensions, and apply that as the global default.

Pedersen

Quote from: mattias on April 08, 2010, 04:17:36 PM
That's just Micro$oft Windows f**cking with you.
I can not connect 1.1.70 / Windows7 / USB with Vems controller.
1.1.18 connects fine.

Pedersen

I'll try the new VEMSTune 13 April 2010 tomorrow

Pedersen

Quote from: Pedersen on April 14, 2010, 08:09:19 AM
I'll try the new VEMSTune 13 April 2010 tomorrow

No connection with new VemsTune ???

Pedersen

USB-RS232 adapter can only be set to Port COM3, COM4, COM5, COM6 as there are 4 USB ports

VemsTune, "ECU Communication":
(X) Serial
Port: COM4
Preferred baudrate: 9600/19200
Timeout (ms): 15
Ignored real-time error count. 3
Internal write delay (ms): 25
SD CARD baud Rate: 115200/57600

ECU not found: 100.0

Default Protocol
Protocol: SIPR
Default read realtime command
read real time: SIPR_RT_MT_EXT.

Pedersen

I bought an old Dell D600 with XP and serial.
Now works both Mega Tune and Vemstune smoothly.

Quote from: [email protected] on April 08, 2010, 01:35:33 AM
Take the config.txt and tables.txt from that zip file I linked to - and store them somewhere.
Use VEMSTune to upgrade to 1.1.70 and read through this http://www.vems.hu/wiki/index.php?page=VemsTune/FirmwareUpgradeExample
Rather than copy the config, drag your config on to the main screen and you will be prompted to upload it.

What should I do with tables.txt

mattias

Quote from: Pedersen on April 17, 2010, 06:53:33 PMWhat should I do with tables.txt
Drag it onto the main window with your ECU online.

Pedersen

#29
Quote from: mattias on April 18, 2010, 02:48:56 AM
Quote from: Pedersen on April 17, 2010, 06:53:33 PMWhat should I do with tables.txt
Drag it onto the main window with your ECU online.
OK! Thanks Mattias. ;D

Vemstune run well and all sensors working fine..... but I have no contact with Wideband O2 sensor.
When I run "WBO2 Calibration" in the "tools" I get no readings on O2 gauge, but I can feel that the sensor gets hot.