Technical > Wiring & Sensors

EGT senzor readings jumping around?!

<< < (2/2)

lost:
My EGT sensor is connected to exhaust output of one head of V6 engine,  even with all injectors disconnected on that head i get EGT gauge in VEMS to jump as engine is running , somehow releated to rpm.
That happens only when running injectors with low-z 8ch extension, when i run high ohm injectors with PWM disabled i dont have that problem.

Where is 220nF capacitator that "Mr_G" was writing about in this topic?

I have v3.6

lost:
This should be solved after adding 220nF capacitator between + and - egt wires.

Navigation

[0] Message Index

[*] Previous page