« previous next »
Pages: [1]

Author Topic: Basic Loom Qs (12v source)  (Read 4554 times)

Offline Tom

  • Jr. Member
  • **
  • Posts: 13
  • BHP: 1
Basic Loom Qs (12v source)
« on: February 24, 2010, 12:31:46 am »
I'm currently putting my VEMS loom together, just wanted to check my plans were ok:
Rather than use the standard 12v switched supply for everything, I'm thinking about putting a relay in to control a fresh 12v line which I'll use for the VEMS and all sensors / injectors etc...
Are there any parts that I should be supplying with a permanent 12v rather than the switched?
Logged

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: Basic Loom Qs (12v source)
« Reply #1 on: February 24, 2010, 02:45:14 am »
I can see nothing that needs a constant feed apart from a single main relay, you could do worse than copy how the VEMS harness has things setup:
Logged

Offline Tom

  • Jr. Member
  • **
  • Posts: 13
  • BHP: 1
Re: Basic Loom Qs (12v source)
« Reply #2 on: February 24, 2010, 03:43:42 am »
Very useful. Thanks for that Rob.
Logged
Pages: [1]
« previous next »