afterstart enrichment setting

[Denmark]

Hi All

still trying to go from 1.0.73 to 1.1.64, but i run into tables that i dont know what to put in.

So afterstart enrichment .

-20     202%
0        206%
20       206%
60       206%


This is what the table says now, but dont know if theis is senseble values

Thanks,
Skassa

[lugnuts]

start much lower, closer to 100%, especially at 60 degrees and higher.
If the engine stalls immediately after starting, this after-start enrichment might need to be raised.

[MWfire]

i use
-20 220
0 180
40 130
70 100

[Denmark]

Thanks guys,

i will lower the amount :)

/skassa