Poll

Has your install been spoiled by a P259 blowing?

Yes it has.
21 (51.2%)
No it hasn't.
17 (41.5%)
What is a P259?
3 (7.3%)

Total Members Voted: 41

« previous next »
Pages: 1 [2]

Author Topic: A P259 spoiled my install  (Read 35070 times)

Offline gox

  • Full Member
  • ***
  • Posts: 198
  • BHP: 6
Re: A P259 spoiled my install
« Reply #15 on: August 15, 2010, 05:55:18 am »
Mine was dead last year.Everything i did before his death was disconnecting the EGT sensor and connecting it again (was checking for wire connection),when i wanted to start the car,there was no rpm signal....the friend who does electronic repairs replaced it and never had problem again....
Logged
E30 2.7 - VEMS,KKK K27.2,Schrick,1bar

Offline laine_16v

  • Jr. Member
  • **
  • Posts: 43
  • BHP: 3
Re: A P259 spoiled my install
« Reply #16 on: September 02, 2010, 06:41:10 pm »
Fried mine setting up my fuel pump relay and in a moment of stupidity put 12v on ground. ECU worked fine but no crank signal.

Sent it off to Rob to fix but as soon as it got to his it worked fine, he sent it back and it worked fine for 10,000 miles before i blew the engine up with someting compeltely unrelated :D
Logged

Offline mattias

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1075
  • BHP: 41
    • Sävar Turbo Site
Re: A P259 spoiled my install
« Reply #17 on: June 29, 2014, 10:41:46 pm »
This is still an issue, even with the universal harness and provided relays.

Just a heads-up. Sad situation, has caused me many support head aches.
Logged
Pages: 1 [2]
« previous next »