project 200sx sx13 vems powered one day

[BenFenner]

Much better. I approve. =]

[damo_S13]

well got a few thing that have turned up now

carbon fiber roof scoop from driftworks

and from jez at h-dev

KS-3 knock / detonation sensor and pro kit

1.6 mtal head gasket

ik24 plugs



also my mate tim has done some more work for me with very little help from me

anyway thanks tim

front and rear sub frames are now all cleaned up and painted not long before the fitting parts starts

also the front archs are de rusted and welded up and updersealed

[damo_S13]

[BenFenner]

I love the pink. Dan Martin and I have been debating painting under body items hot pink for a while now (since we've been so busy painting visible items black). Apparently we're not the only ones with the pink idea. =]

[damo_S13]

cool. im glad im not the one

update

well got a few more bits that have turned up new

one big turbo, manifold wastegate, osg twin plate clutch and pfc thats for sale now.....



This holset hx40 turbo is a little big :wack: told from last owner it will spool up around 3500-4000 so will see how its goes

[damo_S13]

Well me and tim have started to bolt it back together

Sorry about the poor pictures my camra phone dont like taking pictures now

so thats the cross member and the steering rack back together with new bushs



and then it bolted to the s13 with my apex gen 1 coilovers. we also got the front hubs and DB-power tension rods all bolted on too but no pictures of this at min



We then started on striping the diff and shiming it up. due to all the oil i only got a before and after picture but tim has one of it in bits at his so hope to get that off him tomorrow and posted up :thumbs:

before

after


again i would like to thank tim for all his help 

[damo_S13]

here is some better pictures from yesterday work

[damo_S13]

me and tim have got a little more work done again... we are getting it back on all 4 wheels asap so we can move it down to a unit i have got the use of for a few weeks so we can finish the welding in the dry

rear subframe and diff put to gether


DBpower looking collers (thanks dan :thumbs:)


subframe on the car


we also go the rest of my dbpower arms and the hubs on too but was to dark to take a picture

again thanks to tim and also dan at DBpower you got the arms out to me asap 

[damo_S13]

hhhhhhhhhhhhmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm

VVVVEEEEMMMMSSSS with full stand alone loom

THANKS PhatBob



and the coil pack for the waste spark setup

[damo_S13]

got some work done over the weekend

Front lights fitted and wired in


front chargespeed wide front wings fitted


roll cage test fitted


and started looking at how im going to fit the light winds

[damo_S13]

well got some more work done on the s13 today well i had a small army of my bro, tim and my dad so erm i just did a little wiring of which i have not that much to do now really, anyway on to the pictures and video

ok so will start with roll cage taken out tiding some wiring up (bro )



a picture of the mity tim who i owe a lot to for all his help



mark (bro) cleaning and preping the inside rear for painting, tim bolting cage in



my dad marking up for fitting of the roof scoop



video of my dad cutting hole for it



and it fitted




and just to prove my missis soon to be my wife and can and likes to work on my s13 here she is

[damo_S13]

little bit more done today thanks to every one again

firewall all weldered up (thanks tim)


cleaning up/sorting for paint inside the s13 (bro with the hover)


then i started stripping off all the carpet glue from the blue carpet i had fitted



still got a bit togo removing the glue but i never got a picture with it all just about gone

the missis also polished the bonnet for us

[damo_S13]

sorry for the crapy pictures used the cam fone welding is alot better than it looks



So tim today finished off the welding needed for the cage



We bolted it all down and so its now all in and finished, we then started / finished off cleaning the inside for painting and then painted......

Please note we did not prep at all on the inside justed cleaned it so the paint would take. Its not the best paint job in the car but it looks clean and so im happy.

pictures taken at half way doing the back of car so more to come tomorrow




Next the seats and harness will go back in and then the rest of the wiring new switch pannel, the dash back in job done in the car

That leaves body work to sort and paint, engine and vems to fit / wire in. exhuast to sort then its start /run in engine get graphics sorted.

Then get the s13 mapped up and its done





shit so much to do yet

[damo_S13]

paint just almost finished inside the car but ran out of paint and money to buy paint with :eek:

[damo_S13]

seats and harness back in