Fiat Coupe 20vt - cam sync ???

[Gumetina]

I have one Fiat Coupe that is refusing to cooperate on camsync.

crank trigger should be 270btdc on cyl 1. but 126BTDC on cyl.2 so that works, and the fire order is transverted from 1-2-4-5-3 to 2-4-5-3-1

My question is, does anybody know if stock cam sync fits (falls when it should) for this setup to work, or i will need to remove the engine for the hall sensor modification ? (a pain)

Thanks :D

RAle

[Gumetina]

got it working :)

did not check with strobe light, will do it later...

trigger tooth 8
next tr. tooth 24
deg. btdc 66

cam sync

signle edge
falling