Technical > Wiring & Sensors
lcd with serial interface
(1/1)
Seight-v8:
hello all,
Can a LCD screen with a serial (IASI-2-LCD Module) interface be used with the vems ecu.
The serial connection only has 5 pins
GND
RX(i
5V
TX
RX
Or will i need to wire it as per the instructions in the manual.
cheers
sott
jrussell:
The LCD interface is for parallel LCD screens and will not work with serial screens.
Seight-v8:
cheers
its no problem will just de-solder it from the LCD screen, as it came this way.
and connect it up as per the VEMS instructions...as its the same screen.
scott
Navigation
[0] Message Index
Go to full version