Author Topic: ignition coils and crank triger questions  (Read 6075 times)

Offline blown_g

  • Jr. Member
  • **
  • Posts: 18
  • BHP: 0
ignition coils and crank triger questions
« on: December 16, 2009, 06:12:58 am »
I currently have msd dual tower blocks http://static.summitracing.com/global/images/prod/large/msd-8224.jpg

Which option should I chose to run my 4 cyl, Im thinking option 8?

Also for the crank trigger, what is the correct method to run a VR sensor with a 60-2 or 30-1 wheel or can I design a hall sensor with 3 magnets?  Whats the most accurate way to read crank movement? 

thanks

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Re: ignition coils and crank triger questions
« Reply #1 on: December 16, 2009, 06:45:30 am »
What is option 8?

If you have a 60-2 or a 36-1 setup that a VR sensor hooked into your vems ecu will run it no problem.

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: ignition coils and crank triger questions
« Reply #2 on: December 16, 2009, 02:11:44 pm »
Go for a 36-1 trigger wheel, it will be the easiest to use.

Offline blown_g

  • Jr. Member
  • **
  • Posts: 18
  • BHP: 0
Re: ignition coils and crank triger questions
« Reply #3 on: December 19, 2009, 06:24:13 am »
OK so im using a 30-1 ring, thinking of mounting it at the back of my dampened pulley via bolts.  Is there chances of smal vibratons will cause rpm problems?

Secondly how do you determing the position of the ring according to tdc and position of the VR SENSOR?

thanks