Author Topic: sequential shift light.  (Read 5417 times)

Offline Tony C

  • Hero Member
  • *****
  • Posts: 650
  • BHP: 8
    • Capriracing
sequential shift light.
« on: December 03, 2009, 01:53:57 am »
 is there any way to set up the vems to trigger a set of led's in the rev counter face that light up  as you approach set rev limit?

im always missing my shift with the one light that fires on, just wondering if it would be a bit better with more than one that lights up.

Vems Ecu, Twin Plenum efi and N2o
13.314 @ 104.39 mph (10/06/07 3.9 v8)
Sponsored by: www.caprisport.com & www.interpart.biz
Web site: http://www.capriracing.co.uk

Vems Firmware: V1.1.74

Offline GintsK

  • Hero Member
  • *****
  • Posts: 1257
  • BHP: 50
Re: sequential shift light.
« Reply #1 on: December 03, 2009, 04:34:06 pm »
You can use two misc outputs for 3 LEDs row. Like MS do.

Offline Tony C

  • Hero Member
  • *****
  • Posts: 650
  • BHP: 8
    • Capriracing
Re: sequential shift light.
« Reply #2 on: December 03, 2009, 10:40:22 pm »
oh rite,
thanks,
is there any info anywhere on how to set it up at all mate?

Vems Ecu, Twin Plenum efi and N2o
13.314 @ 104.39 mph (10/06/07 3.9 v8)
Sponsored by: www.caprisport.com & www.interpart.biz
Web site: http://www.capriracing.co.uk

Vems Firmware: V1.1.74

Offline GintsK

  • Hero Member
  • *****
  • Posts: 1257
  • BHP: 50
Re: sequential shift light.
« Reply #3 on: December 04, 2009, 05:00:04 am »
You mean software or hardware?

Offline Tony C

  • Hero Member
  • *****
  • Posts: 650
  • BHP: 8
    • Capriracing
Re: sequential shift light.
« Reply #4 on: December 04, 2009, 05:35:11 am »
both  :D

Vems Ecu, Twin Plenum efi and N2o
13.314 @ 104.39 mph (10/06/07 3.9 v8)
Sponsored by: www.caprisport.com & www.interpart.biz
Web site: http://www.capriracing.co.uk

Vems Firmware: V1.1.74