Author Topic: cranking pulse array  (Read 5189 times)

Offline Seight-v8

  • Sr. Member
  • ****
  • Posts: 339
  • BHP: 6
    • Members Page - Scott Richmond
cranking pulse array
« on: December 02, 2009, 09:15:54 pm »
hello all,

anyone got an idea what % i should start with in the crank pulse array.

Im running a rv8 4.6 RV8 with 17.0ms req fuel.

Tried anything from 150% to 469%...and just wont have it.

totally frustrated now, and have no idea where to go next.

I just dont know enough to get this thing started....

anyone got any ideas to help out, before i loose my mind.

cheers

scott
Engine:Rover V8 4600cc
Vems Firmware:V1.2.38, GPS, SDcard, LCD & Dual lambdas, Wasted spark, 36-1 trigger, Cam Sync & Bluetooth serial.

http://www.vems.hu/wiki/index.php?page=MembersPage%2FScottRichmond

Offline dnb

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 837
  • BHP: 19
Re: cranking pulse array
« Reply #1 on: December 03, 2009, 01:46:51 am »
Which firmware?  (I know I should know, but I can't remember.)

Mine is somewhere around 270% at 0 degrees, 145% at 40 degrees and 105% at 70 degrees.