nice features to have "request"

[S.g]

How about a straight forward anytrim where the % ethanol is used. Or a direct input from the continental Ethanol content sensor can be used in anytrim.
Some people are saying it's possible to have it work in anytrim,but no real direction ....the only thing thats out there is the display , where the gauge shows % Ethanol after changing the code in the ini file as directed. 
Wouldn't it be nice just to take the %ethanol value on the display gauge that works and use it in anytrim tables ie: %ethanol/spark trim or fuel trim or cranking pw

[RazOn]

Need more options under "safety".

Two common things in particular:

-running lean over a certain boost (maybe even have a map). Easy to have a tired fuel pump, dirty fuel filter, weak alternator or electrical problem.
-low oil pressure. Some setups might use more oil than the pump is designed for: turbo, vtec, etc.

[Kamuto]

Need more options under "safety".

Two common things in particular:

-running lean over a certain boost (maybe even have a map). Easy to have a tired fuel pump, dirty fuel filter, weak alternator or electrical problem.
-low oil pressure. Some setups might use more oil than the pump is designed for: turbo, vtec, etc.

there is anytrim, learn to use it

[RazOn]

there is anytrim, learn to use it

I'm thinking more like stuff that will shut down the engine, requires power off then back on to clear. This is to save the engine. If the pump fails or you run out of injectors, or boost goes past what the sensor can read... you can put all the correction you want... you won't get more fuel.

Same if you loose oil pressure. You don't want corrections, you want immediate shutdown.
Talking from experience here... lost an engine 2 weeks ago.

Good sales point too ;)

[Kamuto]

there is anytrim, learn to use it

I'm thinking more like stuff that will shut down the engine, requires power off then back on to clear. This is to save the engine. If the pump fails or you run out of injectors, or boost goes past what the sensor can read... you can put all the correction you want... you won't get more fuel.

Same if you loose oil pressure. You don't want corrections, you want immediate shutdown.
Talking from experience here... lost an engine 2 weeks ago.

Good sales point too ;)

update to 1.2.38 and shut down your car from low oil pressure :) even 1.2.32 can do this no problem... seems that's user problem which don't know how to use features not the ecu :)

[mads b (dk)]

Hi  :D

1) I would like to have a "tuning by statistic" funktion in vemsdisplay.

2) why is vemsdisplay logs not in the same format as vemstune ?

3) a possiblity to turn on/off funktions like. antilag, launccontrol..... its alot easier then making wires  ;)

Regards Mads

[Sam8888]

For VEMSdisplay app:

If i set the VEMSdisplay to V3 datastream, it disables AIM protocol. It'd be a nice feature to have to when i exit VEMSdisplay it'd enable back the AIM protocol, therefore i can use different bluetooth apps too.

[Kamuto]

For VEMSdisplay app:

If i set the VEMSdisplay to V3 datastream, it disables AIM protocol. It'd be a nice feature to have to when i exit VEMSdisplay it'd enable back the AIM protocol, therefore i can use different bluetooth apps too.

use second serial output for that :)))

[Sam8888]

For VEMSdisplay app:

If i set the VEMSdisplay to V3 datastream, it disables AIM protocol. It'd be a nice feature to have to when i exit VEMSdisplay it'd enable back the AIM protocol, therefore i can use different bluetooth apps too.

use second serial output for that :)))

Aaaaand?
I guess you missing the point. I want to use several apps with 1 BT...

[Kamuto]

For VEMSdisplay app:

If i set the VEMSdisplay to V3 datastream, it disables AIM protocol. It'd be a nice feature to have to when i exit VEMSdisplay it'd enable back the AIM protocol, therefore i can use different bluetooth apps too.

use second serial output for that :)))

Aaaaand?
I guess you missing the point. I want to use several apps with 1 BT...

yea, missed that a little. sorry :)

[Sam8888]

For VEMSdisplay app:

If i set the VEMSdisplay to V3 datastream, it disables AIM protocol. It'd be a nice feature to have to when i exit VEMSdisplay it'd enable back the AIM protocol, therefore i can use different bluetooth apps too.

use second serial output for that :)))

Aaaaand?
I guess you missing the point. I want to use several apps with 1 BT...

yea, missed that a little. sorry :)

No probs. I didn't know there's a 2nd serial output though.  ;D

[Kamuto]

No probs. I didn't know there's a 2nd serial output though.  ;D

http://www.vems.hu/wiki/index.php?page=GenBoard/UnderDevelopment/FirmwareChanges

has it from 1.2.35 you can find how to configure it here
http://www.vems.hu/wiki/index.php?page=BroadcastDatastreamAim

[fphil]

To disable "RPM filter, cam base trigger" during cranking when it is said "enabled" in "Primary trigger settings" (if this is not already the case, but I believe not...)

[Sam8888]

To have Acceleration enrichment TPS scale. Accel enrichment scaled by the amount of throttle opening. (Like RPM scaling, but with TPS value)

To have clt dependant revlimit. For example: above 105°C revlimit to 3000, and under 50°C 3500

[Kamuto]

To have Acceleration enrichment TPS scale. Accel enrichment scaled by the amount of throttle opening. (Like RPM scaling, but with TPS value)

To have clt dependant revlimit. For example: above 105°C revlimit to 3000, and under 50°C 3500

anytrim