News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

Seven replica with 1.8T-20V

Started by Morty, May 02, 2009, 07:29:45 PM

Previous topic - Next topic

MWfire

do you have thicker head gasket or compression is 12.3:1 ?

Morty


MWfire

Quote from: Morty on February 02, 2010, 03:16:15 PM
Compression is 12,3:1.
what fuel do you use? Can you send me spark map ?
I'm doing engine with 10.8:1 compresion and turbo, so i'm curious about your setup.

Morty

My plan is to run either 99 octane (if possible) or E85 (104 octane) if needed.

The engine is still being built and I have not done any mapping yet.

I will not have any turbo on this, so I guess there will be a significant difference between the two engines.

As soon as I have the engine up running I will post my spark table.