When asking for technical help at the very least let us know the version of firmware you are running.Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html
what did you put for trigger tooth width?
I have one customer running a M20 with 1.1.70 and wasted spark coils and no issues there.Your angular width of tooth is 4614.00 degrees. Which we know can not be right Your fuel table is also very strange since the ecu is setup for map multiplication.Your lambda table could be alot leaner as well Also not sure why your injector output table is not "normal"