vemstune - how to setup gauges

[multiplex]

this may be a stupid question, but how do i setup gauges in vemstune?

I see how i can add guages, but once i click something else they hide and I can't find where to 'view' them again without adding another gauge.  How can i dock them like in megatune?

[multiplex]

ok it looks like some gauge functionality is lost in the 10-2 release. Group editor opens up to a blank screen, and there are no groups listed under the view menu.

when is the next version going to be released?

MSQ export is still broken too :(

they fixed the one issue i mentioned, but then created another as the matrix does not hold the right data

ok done venting  ::)  :'(

[gunni]

It´s a continous loop of something goes good, while something else goes bad instead.

[Sambas]

ok it looks like some gauge functionality is lost in the 10-2 release. Group editor opens up to a blank screen, and there are no groups listed under the view menu.

when is the next version going to be released?

MSQ export is still broken too :(

they fixed the one issue i mentioned, but then created another as the matrix does not hold the right data

ok done venting  ::)  :'(

16x9 display resolution? By default it only supports 4x3 and 16x10, but you can add your own define in v3gui.cfg [devices/v3/defaultgaugesfiles]

[peter_jensen]

Hi Sambas

I have problem with version 2009-10-02 no gauges will come up. If I changes resolution to 1280x800 then there is no problem.
22:37:46   File not found! C:\Program Files (x86)\VemsTune\_2\config\

Can you make a v3gui fore resolution 1920x1080?

Also the numbers in the gauge is still black and then invisible only if I switch themes to zafir they is visible.

AMD x4 64 bit
Vista



Thanks Peter       

[multiplex]

wow, so its tied into screen resolution?

my resolution is 1280x768

thats 16x9.5!

will it accept that?

i did change resolution and the guages work  :'(

[Sambas]

Hi Sambas

I have problem with version 2009-10-02 no gauges will come up. If I changes resolution to 1280x800 then there is no problem.
22:37:46   File not found! C:\Program Files (x86)\VemsTune\_2\config\

Can you make a v3gui fore resolution 1920x1080?

Also the numbers in the gauge is still black and then invisible only if I switch themes to zafir they is visible.

AMD x4 64 bit
Vista



Thanks Peter       

make a copy of gauges-1280x800.db and rename it gauges-1920x1080.db
then add line r_16_9=gauges-1920x1080.db to v3gui.cfg
roundgauge problem is fixed in next release (64 bit problem).

wow, so its tied into screen resolution?

my resolution is 1280x768

thats 16x9.5!

will it accept that?

i did change resolution and the guages work  :'(

You could try r_5_3, it might also work. and just make a copy of gauges file

[z0tya]

The trick is working! (I dont really understand why they release new version with a heap of bug...)
My saved 1.1.27 vemscfg - which works fine with the 6/25 dated vemstune - show as 1.1.18, and none of previously saved cfg has not ignition bins!!!

[multiplex]

thanks sambas!

5x3 worked

[peter_jensen]

Thanks Sambas

Now Vista 1920x1080 is working by following your advice great support. :D :D

Peter