vemstune - how to setup gauges

[multiplex]

this may be a stupid question, but how do i setup gauges in vemstune?

I see how i can add guages, but once i click something else they hide and I can't find where to 'view' them again without adding another gauge.  How can i dock them like in megatune?

[multiplex]

ok it looks like some gauge functionality is lost in the 10-2 release. Group editor opens up to a blank screen, and there are no groups listed under the view menu.

when is the next version going to be released?

MSQ export is still broken too

they fixed the one issue i mentioned, but then created another as the matrix does not hold the right data

ok done venting   

[gunni]

It´s a continous loop of something goes good, while something else goes bad instead.

[Sambas]

ok it looks like some gauge functionality is lost in the 10-2 release. Group editor opens up to a blank screen, and there are no groups listed under the view menu.

when is the next version going to be released?

MSQ export is still broken too

they fixed the one issue i mentioned, but then created another as the matrix does not hold the right data

ok done venting   

16x9 display resolution? By default it only supports 4x3 and 16x10, but you can add your own define in v3gui.cfg [devices/v3/defaultgaugesfiles]

[peter_jensen]

Hi Sambas

I have problem with version 2009-10-02 no gauges will come up. If I changes resolution to 1280x800 then there is no problem.
22:37:46   File not found! C:\Program Files (x86)\VemsTune\_2\config\

Can you make a v3gui fore resolution 1920x1080?

Also the numbers in the gauge is still black and then invisible only if I switch themes to zafir they is visible.

AMD x4 64 bit
Vista



Thanks Peter       

[multiplex]

wow, so its tied into screen resolution?

my resolution is 1280x768

thats 16x9.5!

will it accept that?

i did change resolution and the guages work 

[Sambas]

Hi Sambas

I have problem with version 2009-10-02 no gauges will come up. If I changes resolution to 1280x800 then there is no problem.
22:37:46   File not found! C:\Program Files (x86)\VemsTune\_2\config\

Can you make a v3gui fore resolution 1920x1080?

Also the numbers in the gauge is still black and then invisible only if I switch themes to zafir they is visible.

AMD x4 64 bit
Vista



Thanks Peter       

make a copy of gauges-1280x800.db and rename it gauges-1920x1080.db
then add line r_16_9=gauges-1920x1080.db to v3gui.cfg
roundgauge problem is fixed in next release (64 bit problem).

wow, so its tied into screen resolution?

my resolution is 1280x768

thats 16x9.5!

will it accept that?

i did change resolution and the guages work 

You could try r_5_3, it might also work. and just make a copy of gauges file

[z0tya]

The trick is working! (I dont really understand why they release new version with a heap of bug...)
My saved 1.1.27 vemscfg - which works fine with the 6/25 dated vemstune - show as 1.1.18, and none of previously saved cfg has not ignition bins!!!

[multiplex]

thanks sambas!

5x3 worked

[peter_jensen]

Thanks Sambas

Now Vista 1920x1080 is working by following your advice great support.

Peter