« previous next »
Pages: [1]

Author Topic: Tach out divider setting  (Read 5296 times)

Offline paul_f

  • Full Member
  • ***
  • Posts: 120
  • BHP: 8
Tach out divider setting
« on: October 08, 2009, 04:05:36 am »
How do you go about setting the divider when using the internal tach out?

It seems that around 10-16 is in the right area.  Is it linked to the number of teeth?

The tach isn't that accurate (after getting my speedo calibrated I took my gearbox out to swap it as I decided it wasn't the ratio I thought it was as the erpm/mph didn't correlate.  Got it out and counted the teeth on the ring gear and it was actually the tacho that was wrong ;D)
Logged

Offline paul_f

  • Full Member
  • ***
  • Posts: 120
  • BHP: 8
Re: Tach out divider setting
« Reply #1 on: October 08, 2009, 04:07:03 am »
Logged
Pages: [1]
« previous next »