News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

Tach out divider setting

Started by paul_f, October 08, 2009, 04:05:36 AM

Previous topic - Next topic

paul_f

How do you go about setting the divider when using the internal tach out?

It seems that around 10-16 is in the right area.  Is it linked to the number of teeth?

The tach isn't that accurate (after getting my speedo calibrated I took my gearbox out to swap it as I decided it wasn't the ratio I thought it was as the erpm/mph didn't correlate.  Got it out and counted the teeth on the ring gear and it was actually the tacho that was wrong ;D)

paul_f